Hammerli SP20 RRS
This blog contains information I gathered on the Hammerli SP20 RRS.
vrijdag 2 december 2016
Sight post with 2 mm extra height
›
Today I received my Walther part no. 2743776 by mail from Krale Schietsport in Staphorst. I first compared and measured it against one of t...
1 opmerking:
zondag 27 november 2016
Rear sight angle vs front sight post hight.
›
Most of my shooting is 10/12 meter target shooting. Some time ago I noticed that, to get my sights properly adjusted, I had to turn the re...
maandag 14 november 2016
Several Hammerli SP20 videos
›
Videos collected on Youtube, videos are not made by me ...
vrijdag 4 november 2016
Fully adjustable Pardini trigger mounted on SP20 RRS
›
With Pardini trigger in middle position Stock trigger in most forward position The standard SP20 trigger ...
vrijdag 2 september 2016
Barrel housing SP20 RRS
›
To remove the barrel and barrel housing start by removing the magazine and grip assembly. This is done by unscrewing 1 screw in the grip ...
dinsdag 7 juni 2016
Torque settings barrel housing Hammerli SP20 RRS
›
As I was reading about 22lr rifles I found some articles on Anschutz torque setting and there effect on accuracy. One article stated that ...
‹
›
Homepage
Internetversie tonen
